BPDDN - M778, GLYCEROL ANHYDROUS

  • MSDS: BPDDN
  • Manufacturer: J T BAKER INC
  • Product Name: M778, GLYCEROL ANHYDROUS
  • National Stock Number: 6810-00N029858
Product Identification

Product ID:M778, GLYCEROL ANHYDROUS
MSDS Date:11/05/1986
FSC:6810
NIIN:00N029858
MSDS Number: BPDDN

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865-2219
US

Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)

Info Phone: 800-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

10 MG/M3 (MIST)

CAS: 56-81-5

RTECS: MA8050000

Fraction By Weight: 90-100%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 (MIST) 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO EFFECTS OF OVEREXPOSURE WERE
DOCUMENTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HLTH HAZS.
Medical Cond Aggravated by Exposure:NONE INDENTIFIED

First Aid

First Aid:INGEST:IF PERSON IS CONSCIOUS, IMMEDIATELY GIVE LARGE AMOUNTS
OF WATER. GET MEDICAL ATTENTION. INHAL:IF PERSON BREATHES LARGE
AMOUNTS, MOVE THE EXPOSED PERSON TO FRESH AIR. GET MEDICAL
ATTENTION. EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES. GET MEDICAL ATTENTION. SKIN:IMMEDIATELY WASH WITH
PLENTY OF SOAP AND WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Flash Point Method:CC
Flash Point:390F,199C
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH STRONG OXIDIZERS MAY CAUSE
FIRE OR EXPLOSION.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. TAKE UP
WITH SAND OR OTHER NONCOMBUSTIBLE ABSORBENT MATERIAL AND PLACE INTO
CONTAINER FOR LATER DISPOSAL. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR OXIDIZING MATERIALS.
Other Precautions:MAY CAUSE IRRITATION. DURING USE AVOID CONTACT WITH
EYES, SKIN, CLOTHING. WASH THOROUGHLY AFTER HANDLING. WHEN NOT IN
USE KEEP CONTAINER TIGHTLY CLOSED.

Exposure Controls

Respiratory Protection:RESPIRATORY PROTECTION REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS ABOVE 10 MG/M3, A
NIOSH/MSHA APPROVED DUST/MIST RESPIRATOR IS RECOMMENDED.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
VAPOR AND MIST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:554F,290C
Melt/Freeze Pt:M.P/F.P Text:64F,18C
Vapor Density:3.2
Spec Gravity:1.23 (H2O=1)
Solubility in Water:APPRECIABLE (>10%)
Appearance and Odor:CLEAR, COLORLESS, ODORLESS SYRUPY LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.